实验三STC15系列单片机内部双通道10位AD转换程序(国外英语资料).docVIP

实验三STC15系列单片机内部双通道10位AD转换程序(国外英语资料) / * T8 T3 and T2; Or T3, T8, T7 has meet T2; The regenerator R36 can change the power of 10 AD transitions in the internal AD to the 1 channel Pressure Vin0 or Vin1, sampling period 5ms; The voltage to AD is measured in T8 (for T6) using the multimeter. Its in hexadecimal, zero The channel number is shown in LCD (1 line); The number of channels is shown in LCD (2 lines); The 0 channel corresponds to the theoretical value on the left 5 digital tubes (1 symbol, 2 integer bits, 2 decimal places); The 1 channel corresponds to the theoretical value on the right 5 digital tubes (1 symbol, 2 integer bits, 2 decimal places); Study whether there is a proper delay between the two channels # include 15f2k. H Include absacc.h The # define u8c unsigned char code / / is stored in the code without the symbol 8 character abbreviation # define u8 unsigned char / / no symbol 8 character abbreviations # define u16 unsigned int / / unsigned integer abbreviation The pound sign define writecmd XBYTE [0xECFF] / / 1602 write the instruction port address, E positive for the drop edge (A12 = 0), R/W = A9 = 0, and RS = A8 = 0 write instructions # define readstate XBYTE [0xEEFF] / / 1602 read state port address, E positive pulse has high level (A12 = 0), R/W = A9 = 1 read, RS = A8 = 0 read state Pound sign define writedata XBYTE [0xEDFF] / / 1602 write the data port address, E positive for the drop edge (A12 = 0), R/W = A9 = 0, and RS = A8 = 1 read the data The # define Displayseg XBYTE [0x7FFF] / / digital pipe segment code localizer writes port address (A15 = 0) # define Displaybit XBYTE [0xBFFF] / / the digital pipe bitlocker for the port address (A14 = 0) # define LCD_CLR 0x01 / / clear screen, clear DDRAM content is empty, AC = 00H The # define LCD_MODE 0x38 / / mode setting, 001DLNF * *, DL = 1 is the 8-bit data interface, and N = 1 and 2 lines show that F = 0 is 5 * 7 dot matrix characters The # define LCD_ON 0x0c / / display switch control, 00001