宽带常见故障及解决方法(国外英语资料).docVIP

宽带常见故障及解决方法(国外英语资料) Common failures and solutions for broadband: The common hardware failures of ADSL are the problems of loose joints, broken wires, broken hubs, and computer system failures. It can be helped by looking at the indicator light. In addition, the voltage is abnormal, the temperature is too high, the lightning strike and so on also can cause the breakdown easily. Where the voltage is not stable, it is best to provide small power UPS for the equipment. The MODEM should keep dry and ventilated, avoid water and keep clean. When a thunderstorm is in the air, make sure to remove the MODEM power source and all the wires. ADSL fault location needs certain experience, and the general principle is: pay attention to light (including led light for power light, data, network card indicator) and the error message, after the first hardware (MODEM and nic Settings) software (dial-up software), external after internal first, after the first local network, fully check before declaration. The line is caused by the users multiple interpolation Reconnect the wiring and reinforce or replace the rj-11 and rj-45 lines with insulation tape 2, exterior fault Reporting 112 and outside team maintenance The power block or modem is burnt out Check whether the users power supply is normal or not The HBPPPOE software is not working properly and the user reflects the pppoe icon into a blue strip The software conflict can be resolved by reinstalling HBPPPOE software or setting up a detailed lod activation on the connection in the software menu 5, Windows XP OS For Windows XP OS cannot use HBPPPOE CD for installation, but must use Win XP OSs built-in dial-up software for installation. The method is as follows: start - control panel - network or Internet connection - network connection - task of creating a new connection - to choose the first connected to the Internet - the second manually my connection - choose the second requires that the user name and password to connect to enter the