投影仪的性能主要指标(国外英语资料).docVIP

投影仪的性能主要指标(国外英语资料) Light Out It refers to the light energy that the projector outputs, which is in lm. A physical quantity related to the light output is brightness, is refers to the screen surface by light irradiation of light energy and the ratio of the area of the screen, brightness of the commonly used units are lux (lx). When the light from the projector is passed by a certain amount, the greater the brightness of the projection area, the higher the brightness. The light output of the projector is determined by the projection and screen area, performance and lens performance, usually the screen area is large and the light output is large. The projector lens with liquid coupling lens is good, and the projector light output can be improved accordingly. Horizontal scanning frequency (frequency) The movement of electrons from left to right on the screen is called a horizontal scan, also called a scan. Scan times per second is called horizontal scanning frequency, video projector horizontal scanning frequency is fixed, 15.625 KHz (PAL) or 15.725 KHz (NTSC) data and graphics projector scanning frequency is not a frequency spectrum; In this band, the projector automatically tracks the input signal frequency, which is fully synchronized with the input signal line. The horizontal scanning frequency is an important index to distinguish the grade of the projector. The frequency range in the 15khz-60khz projector is usually called a data projector, such as SHARP xg-3700e, xg-3900e, xg-nv2/20; SONY V500Q. The upper limit of more than 60kHz is usually called a graphical projector, such as SHARP xg-sv1a. SONY vpl-d50qm, VPL - G70QM, VPL - 1292QM. Panasonic PT - L395E, PT - 1083E/U. Vertical scanning frequency (field frequency) The beam is scanned horizontally and then moves downward, a process called vertical scanning. Each scanning an image formation, the number of scans per second is called vertical scanning frequency, vertical scanning frequency is also called the refresh