根据电流变化判断手机故障部位(国外英语资料).docVIP

根据电流变化判断手机故障部位(国外英语资料) According to the current change, it is necessary for the maintenance personnel to determine the fault spot quickly and accurately. The characteristics of current changes in normal operation of mobile phones Press the power button, if the phones power, reset and 13 MHZ clock are normal, the CPU is about 50 ma (current) began to work, then the software work (current is 60 ~ 100 ma), start searching the web (current) about 200 ma, until the lights are on standby (for 10 to 20 ma current, jump). Second, the judgement detection that does not enter network failure The rf circuit of the phone includes both the receiving circuit and the transmitter circuit. The first thing you want to do is distinguish between the receiving part or the firing part. You can use a manual search network in the menu, and if you can search the network, you will be able to make a preliminary judgment that there is a problem with the launch. If you cant search the network, you can say that the receiving circuit has a problem. In addition, also can through the phone after the boot standby current analysis, if a current search network fibrillation after boot, then the current significantly smaller current for 8 ~ 12 ma (off), and regularly oscillating, means that mobile phone to receive part of the normal; Instead, the current is larger (at around 50mA for a period of time, then down to about 10mA for a period of time, and so on), indicating that the receiving part is not normal. If the current is not moving after it is turned on (no search), it is indicated that the problem of not entering the network is a logical circuit (usually a problem with virtual welding or software). In the case of the mobile phone not to be in the net, the two kinds of situation analysis can be neither received nor fired. Not receiving (see any search current, usually 10 ~ 20mA, bouncing back and forth) (1) there is no network for searching current. Failure occurs when the circuit is receiving the fr