局域网打印机共享(外国英语资料).docVIP

局域网打印机共享 The double machine can realize the sharing communication, needs to bind the NETBIOS protocol in the TCP/IP agreement to analyze the computer name, therefore we must examine whether the NetBIOS on TCP/IP has enabled. 1. click start - control panel - network connection in turn. 2. right click the local connection, and then click properties. 3. click the Internet protocol (TCP/IP) to see if the set IP is on the same network segment, and then click properties. 4. click Advanced, - WINS. 5. under the NetBIOS settings, click enable TCP/IP on NetBIOS, and then click OK for two times. 6. click close. Step two: see if the double machine has installed the file and print sharing feature of the Microsoft network and make sure it is not blocked by the Windows firewall In the General tab of the local connections properties window, see if the files and print shares of the Microsoft network have been installed. If not, follow these instructions. 1. click start, control panel, and network connection. 2. right click the local connection, and then click properties. 3. click the General tab, and then click install. 4. click service, and then click add. 5. in the network services list, click file and print sharing on the Microsoft network, and then click ok. 6. click close. Next, see whether the file and printer sharing feature is blocked by the Windows firewall, as follows: 1. click start, click control panel, and then click Windows firewall. 2. on the General tab, make sure that the unchecked exceptions check box is not checked (that is, dont tick). 3. click the exceptions tab. 4. on the Exceptions tab, make sure that the file and printer share check box is checked (tick), and then click ok. Step three: check whether the status of the computer browser service on the double machine is enabled See the Dual Computer Browser service whether the state is enabled, if the Computer Browser service for blank said they did not enable the service, need to start off the computer browser