笔记本连接投影仪常见故障大全(外国英文资料).docVIP

笔记本连接投影仪常见故障大全(国外英文资料) The laptop connection projector is a common failure of the projector for the entire 2010-11-30 09:45 Why is the projector not responding to the power supply? A: since the projector in after turning on the power supply, no reaction, illustrate the projector power supply part is likely to happen the question, but is the power of the internal or external projector power supply has a problem? To do this, you should first check the power converter of the projector specifications and standards required by the same projector, for example, if an external power socket is no grounding or projector using the power cable is not random equipped with projector, this may have caused the projector power input is not normal; Once an external power supply is normal, you can conclude that the projector damage internal power supply circuit, at this point you only have to replace a new projector internal power supply. Why does the projector turn off at work? A: there are two main reasons that the projector should be turned off in the course of work. A user in the operation may not be cut off the power of the projector, so you should first check whether human factors led to the closing of the projector, after rule out this kind of situation, that means there is something wrong with the projector itself, and is likely to be caused by the thermal protection. Because now there are many high-grade in order to prolong the life of the projector, projector using a thermal protection function itself, often encounter the projector internal heat much produced, the working state of the projector will automatically work in the condition of the protection, the projector will be automatically shut off, and in this state, the projector to any external input control is not to make any reply; So when this happens, you dont worry about the projection opportunity suddenly fails, you as long as in the projector automatic shutdown after about half an hour, and then according to the nor