钳工高级工试题(外国英文资料).docVIP

钳工高级工试题(国外英文资料) The advanced fitter exam paper The name score 1, fill in the blanks 2 Points, 30 Points) one The shape of the CAM is summed up in total (disc CAM) , (cylindrical CAM) and (block CAM) three kinds. 2 The common CAM curve is (isovelocity curve) , etc. Cosine acceleration Curve of motion) and (sinusoidal acceleration). 3 The lines of large workpieces, commonly used (pull lines and suspension lines) as a reference to the underlining. 4 In large plate splice, the application (via weiyi) is tested, and its precision and efficiency are more than the traditional plate The process is better. 5 A similar horizontal instrument is used to measure the angular value meter of an artifact in a (horizontal or vertical) position. 6 The offset of the image from a collimator is determined by the reflector, which is not related to the Angle of the reflector. 7 The test of the coaxial error is to find the maximum distance from the axis of the measured axis (twice the value). The error of the coaxial degree. 8 The vertical tolerance is used to control the deviation from the (the elements) 90 The degree of degree. 9 In the measurement of plane error, a key question is: (reference plane) and (minimum inclusive) The test must be correct. 10 It is used mainly to measure the accuracy of the precision machine tool (the horizontal platform) and the (universal turntable). 11 In assembly process, the method of matching parts (error canceling orientation assembly), eliminating and reducing assembly The error can effectively control the assembly accuracy. 12 , T68 Type horizontal horizontal boring table parts require three precision requirements, namely (table turning) Precision, (work Vertical alignment accuracy Horizontal and vertical (vertical) requirements, otherwise the overall accuracy of the assembly will be affected. 13 The process discipline may be divided into (machining process discipline) and (assembly process discipline) because of its different production content. Two ki