STEVAL-ILB005V2;中文规格书,Datasheet资料.pdfVIP

STEVAL-ILB005V2 Demonstration board for the L6585DE combo IC for PFC and ballast control Data Brief Features ■ Input voltage: 88 Vac - 277 Vac ■ Input frequency: 50 Hz - 60 Hz ■ Output power: 54 W ■ Expected efficiency: 90% ■ Expected Input power: 60 W ■ Minimum PF required: 0.95 ■ Maximum THD: 8% ■ Lamp voltage (run mode): 110 Vrms ■ Lamp current (run mode): 455 mArms ■ Maximum ignition voltage: 900 Vpk ■ Maximum preheating voltage: 240 Vac ■ Preheating time: 1 s ■ Ignition time: 60 - 100 ms Description STEVAL-ILB005V2 Requirements for modern fluorescent lamp electronic ballasts focus on driver efficiency and Another important feature of the IC is its capability safety aspects. to control and limit the lamp voltage during the Previous dedicated ICs for ballast applications ignition phase. allowed designers to achieve good driver The pre-heating and ignition durations are efficiency, but they required a lot of external independently configurable, as are the half-bridge circuitry to obtain good power factor correction, switching frequencies for each operating phase low THD and a full set of protection features. (pre-heating, ignition and normal mode). The STEVAL-I