11G101与03G101变化解析(国外英文资料).doc

11G101与03G101变化解析(国外英文资料) Analysis of changes in 11G101 and 03G101 11G101 series Xinping method formally implemented in September 1, 2011: Concrete structure drawings, overall presentation methods, drafting rules and structural details (cast-in-place concrete frames, shear walls, beams and slabs), 11G101-1 Concrete structure drawings, overall presentation methods, drafting rules and structural details (cast-in-place concrete slab stairs), 11G101-2 The overall representation method, drawing rules and structural details of concrete construction drawings (independent foundation, strip foundation, raft foundation and pile cap) 11G101-3 11G101 system flat method atlas than 03G101 series atlas changes greatly: I. scope of application changes: 11G101-1 is suitable for non seismic and seismic fortification intensity is 6~9 degree in design of cast-in-place concrete frame, shear wall, frame shear wall and the main part of the frame shear wall structure construction drawing, and all kinds of structure of the cast-in-situ concrete slab (including slab and slab), part of the underground structure design room of cast-in-place concrete wall, column, beam and slab structure construction drawing. Including the above the basic top of cast-in-place concrete columns, shear walls, beams, plates (including beams, floors and non beam floor) and other components of the flat drawing rule and standard construction details of two major parts. 11G101-3 is applicable to the design of cast-in-place concrete, independent foundation, strip foundation, raft foundation (beam, slab and slab) and pile caps. Including the commonly used cast-in-place concrete, independent foundation, strip foundation, raft foundation (beam, slab, peace plate), pile caps, flat drawing rules and standard construction details of the two most parts. Two 、 general structural changes such as tensile steel bar anchorage length: According to the new criterion, the basic anchoring length, lab, labe, and anchorage length La and