cad经典快键(国外英文资料).docVIP

cad经典快键(国外英文资料) I. Basic Concepts and basic operations Two keyboard shortcuts and drawing preparation Three, 15 basic commands Four, why do you remember these 15 commands? Five, with my custom command First, the concepts needed, and the basic operations 1, CAD is composed of many commands, commands are executed in a variety of ways, basically, there are two: One is to enter the command (or select the command button) and then perform the operation, and the other is to select first, and then execute the command. There are many commands, and these two operations are all possible. Example: when deleting an object, you can choose to delete the command first, then select the object, you can also first select the object, and then select delete command, the results of the two operations are the same. (keyboard input, E space, select object space, or select objects to enter E spaces, the result is the same) 2, transparent command Most commands are executed in a single way, that is, they can only be performed or cancelled during execution. But some command is a command in the implementation process can execute another command that can execute the B command process A command in the B command after the implementation, continue to implement the A command until the end. Such a command is called transparent command 3, the way objects are selected. There are two: one is from upper left to lower right choice, one is from right to left on the choice of two modes of selection result is different, the first kind: the upper left to lower right; only to be pulled out of the box completely surrounded by objects; second: right to left on all the objects; and the intersection of gridlines (including surrounding objects). 4 and relative coordinates This is very important relative to the current point (or the point you set)!!! For example, you want to draw a 1000mm line, select the command, then pick one point from the screen, and then give a direction (moving the mouse to the direction you