CAD衬着初级文字教程(国外英文资料).docVIP

CAD渲染初级文字教程(国外英文资料) This article is contributed by tiankon127 DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. CAD rendering the primary text tutorial essence rendering tutorial (primary text posted Shen Jing Shen Jing (04)!) posted modeling and rendering of the cage model making steps, everyone at the beginning of practice for the production of the best time to look at the real, is helpful to improve the model of the true feeling and artistic sense. The cage by the cage. Cage, cage, cage, cage cage catch, hook, turd plate and other parts are arranged in the cage, perch, food cans and pots. Our traditional cage with bamboo and wood products, and in the door of the cage and the cage etc. are Seiko fine carving, some inlaid with gold and silver jewelry, is extremely precious. Because the model production is relatively simple, so focus on texture, lighting, rendering and presentation, so the model part will no longer provide detailed parameters. The modeling part: first the whole cage is divided into several parts: upper and lower distribution ring (cage), Curve of longitudinal strips of circular arranged (cage), food cans, pots, perch, perch fixtures, door clamps, a four foot, turd disc, cage claw, hook cage, cage hook support, the composition of the whole cage parts can be in a drawing space in different layers, but also in addition the new drawing space after the production, unified copy to a drawing space within the assembly. 1. first in the 3 dimensional space map according to the need to play the auxiliary line box, which is convenient to identify each entity between the position, easy to capture the key points in figure 12. has been according to the drawing of the auxiliary line frame in top view, use the torus command to draw the cage rungs and then adjust the distance between each other in the left view, find each rail section of the central (in all round se