PS结合CAD做彩色平面图(国外英文资料).docVIP

PS结合CAD做彩色平面图(国外英文资料) PS combined with CAD to make color plan Interior part The first step in making a PS color plan is to develop good CAD diagrams. As for the drawing specification, here is not to say, I say habit is in the CAD diagram drawing process, be good at good layers, different objects belong to the best good layer, so CAD is not messy, but also reduce the file size (see the next layer where it is classified as at the same time, as far as possible) the surface of CAD order, line and line transfer should be closed, no gap, it will affect the area you fill. Please pay attention to my CAD layer settings and distribution This is the layer distribution, the CAD diagram is layered and reasonable, so that it is convenient for future operation Lets take an example of a club floor plan At the moment there is a plan of the clubhouse. We removed the display of size and other color plans without marking anything Turn the other layers off so that the outline of a plane comes out Set the mark of the print window (the following red screen box is the window size to be selected by that time). Use the layer switch function to print the desired layers separately, and output the image to the PS for editing. The specific print project is determined by the actual situation. In this example, we want to output as follows: 1) walls and shear walls, columns, doors and windows 2) furniture and sanitary ware 3) ground pavement 4) interior landscaping and others 5) text tagging layer Remember to print virtual prints at the same size as the window tag Output a CAD chart of furniture and a CAD diagram without furniture and open it in PS. The use of drag and drop several layer superimposed on a picture, produced a number of layers, and the layer name for later editing. Here we introduce a more efficient image batch processing method. When you have opened the PS, press ALT+F9 to call the action panel, and take a JPG color wireframe as an example, in the action panel Then you can record e