SMT测验重点(国外英文资料).docVIP

SMT考试重点(国外英文资料) The method of assembling components onto printed circuit boards or other substrates is called SMT process. SMT surface mount technology; AOI automatic optical inspection.. Mounter; a device that attaches electronic components to PCB that has printed solder paste or glue. Why use SMT technology? 1., the pursuit of miniaturization of electronic products, previously used punch plug-in components have been unable to narrow. 2. electronic products are more functional, the integrated circuit (IC) has no perforated components, especially large-scale, Gao Jicheng, IC, have to use surface mount components. 3., batch production, production automation, manufacturers should be low-cost, high yield, high-quality products to meet customer demand and strengthen market competitiveness. Three major steps in SMT technology are solder paste printing, SMT and reflow soldering. Basic components;; solder paste is tin and flux. According to the function of machine can be divided into high speed machine and universal machine, using head type turret type and frame type. The reflow oven is divided into several zones, functions respectively Preheating zone;; constant temperature zone reflow zone cooling zone. The preheating zone function: solvent evaporation; uniform heating element and a circuit board, and the constant temperature zone function: flux removing welding welding surface of the oxide; the components and the circuit board without temperature, uniform heating; solder reflow zone is completely dry. Function: melting, solder paste then, the cooling zone function: flow, cooling and solidification of the solder paste The warning light shows the green light on behalf of the machine running. The yellow light flashes a warning message on behalf of the machine in standby mode. The red light indicates that the machine fails to stop in production. ESD. Electrostatic leakage and dissipation are the most effective modes of grounding. 4 kinds of electrostatic hazards in electro