vi的各种尺寸(国外英文资料).doc

vi的各种尺寸(国外英文资料) Designer practical collection of commonly used sizes! share This is my own from the visual side of China one by one copy, the process is more complicated, but also in order to facilitate future access to it! Reprinted please indicate the vision of China singlelao! Qzone can now directly copy and transfer functions, it is very convenient! 01: common CD design size At present, the market is divided into 3 discs and 5 inch discs. Dimensions are as follows: Take 5 inch compact disc as an example 3 inch plate: Outer diameter 80mm, inner circle 15mm Printing size: outer diameter 78mm; inner diameter 38mm, also printed to 20mm or 36mm. Groove ring diameter: 33.6mm (different disk slightly different, there are no groove). 5 inch plate: Outer diameter 120mm, inner circle 15mm Printing size: outer diameter 118mm or 116mm; inner diameter 38mm; also printed to 20mm or 36mm. Groove ring diameter: 33.6mm (different disk slightly different, there are no groove) As a new type of brush, optical disk packaging has occupied a certain position in the market. The detailed diagram is as follows: The main cover is on the left: the width is 12.6CM, there is 3MM bleeding on the left, the height is 12.1, and the upper and lower 3MM bleed each. Secondary seal (the picture on the right of the main cover): the width is the same size as the left, but the bleeding place is on the right. Bottom paper size (excluding two fold): 13.8CM wide, without bleeding, high 11.8CM, with 3MM bleeding at each level The size of the two fold of the bottom sheet: the effective size is 7MM+3MM wide, bleeding (note one on the left, one on the right), height 11.8CM, and 3MM bleeding each Note: red area is bleeding 02: envelope design size Envelopes must be designed and made in strict accordance with international standards. According to the national standard (GB/T1416-2003), it is necessary to pay attention to the following questions when designing and making envelopes: 1, all with the envelope, the