玻璃生产线及其温度控制系统设计.docVIP

玻璃生产线温度控制系统设计 摘 要 关键词：  Production line of the glass annealing kiln and its temperature control system design Abstract This paper introduces the traditional glass production line annealing kiln feeding device and the improvement of the temperature control system design process. In this paper, glass production line annealing kiln development status at home and abroad, as well as its temperature control system structure and principle were introduced. Then according to the continuous annealing kiln structure characteristics, design a set of flexible change of three-dimensional conveying mechanism conveying device. Combined with the indexing mechanism characteristics, using a stepper motor to drive the gear pair, each conveying device realize flexible conversion. Various types of conveyor speed adjustment is the use of PLC control of frequency converter to realize. In the temperature control system design, the design of each temperature zone in annealing furnace adopts frequency control system, to each temperature zone is used for temperature regulation. Design of annealing furnace and temperature control system to improve the glass products production and efficiency at the same time, also can make the annealing furnace annealing quality can be optimized. Key words: annealing kiln, conveying device, indexing mechanism, temperature control system, PLC control目 录 1 1.1概述 1 1.2国内外发展现状及趋势 1 1.3退火窑的基本结构和温度控制系统的工作原理 3 1.3.1退火窑的基本结构 3 1.3.2温度控制系统的工作原理 4 1.4 设计方案的改进 5 1.5 本设计的主要完成的任务 6 第二章 关于玻璃生产线退火窑的设计 7 2.1 玻璃的退火与退火窑 7 2.1.1 退火的概念、目的和过程 7 2.1.2玻璃制品内应力的类型及成因 7 2.2 退火窑的分类及要求 8 2.2.1 退火窑的分类 8 2.2.2 对退火窑的要求 9 2.3 退火窑的分区 9 2.3.1保温区（A区、B区、C区） 9 2.3.2缓冷区（D区、E区） 10 2.3.3快冷区（F区） 10 2.4 退火窑输送装置的改进 10 2.4.1传统退火窑输送装置的介绍 10 2.4.2 改进后的退火窑三维输送装置 11 2.4.3 主要零部件的设计计算与说明 13 第三章 温度控制系统的硬件组成及软件设计 16 3.1 温度控制系统的硬件组成 16 3.1.1 可编程控制器（PLC）的简介、选用及端口分配 16 3.1.2 变频调速器的应用 17 3.1.3 热电偶的概述及工作原理 18 3.1.4 周波控制系统的组成、原理及性能分析 19 3.1.5 温度控制系统的硬件组成及性能分析 20 3.2温度控制系统的软件设计 21 3.2.1 软件部分的组成及分析 21 3.2.2