浅谈桩基工程钻孔施工技术(国外英文资料).docVIP

浅谈桩基工程钻孔施工技术(国外英文资料) China Engineering Construction Network Your current location: home page Discussion on drilling construction technology of pile foundation engineering In recent years, with the continuous improvement of pile quality, pore speed and construction and environmental protection, some medium and small rotary drilling rigs have been springing up, and more and more attention has been paid by construction workers. The pile or bucket pile, soil pile rotary drilling rig, the overlay construction has good hole quality, fast speed, no noise, no pollution or less pollution and other advantages, for dry hard clay, not static stable liquid mud wall, general overlay with mud. Because of the vast area and complicated geological conditions in our country, the drilling technology must be targeted in the construction of rotary drilling rig to prevent construction accidents such as buried drilling, collapse and so on, so as to avoid losses. In this paper, the construction project of Pudong pile foundation engineering construction case into hole combined with Zhejiang Shunjie Construction Group Limited, how to avoid collapse and burying accidents on construction experience of rotary drilling process, in order to provide the reference to construction. I. General Situation of the project Zhejiang Shunjie Construction Group Co., the construction of a project in Pudong, the total amount of pile 2180 pile type pile, pile diameter, pile diameter of 800 mm, 36 meters deep. The swamp area, about 2 meters for a small amount of construction waste backfill layer, 2 ~ 5 meters for 5 ~ 13 meters of clay soil, sub clay layer, 13 ~ 15 meters of sand, 15 ~ 29 meters sub clay, 29 ~ 34 meters for 34 ~ 36 meters of sand, clay layer. Two, pore forming process The rotary drilling machine is used to drill holes into soil, and the pile forming technology is as follows: setting the pile location, burying the retaining tube, injecting mud, drilling the soil once, clearing the hole once, placi