硬盘保护15招(国外英文资料).docVIP

硬盘保护15招(国外英文资料) 1. Keep the computer working environment clean Hard disk with super fine filter paper breathing hole is communicated with the outside world, it can be used in common cleaning device in the indoor environment, if in the dusty environment, will be adsorbed to the inner surface of the spindle motor, PCBA and blockage of respiratory filters must therefore be dust. Also, the environment is wet and voltage instability can cause hard disk damage. 2, develop the habit of correct shutdown When the hard disk stops working at work, it may cause severe friction between the head and disk and damage the hard disk [1]. It also causes the magnetic head to not reset properly, resulting in the scratch of the hard disk. Shut down, must pay attention to the panel on the hard disk indicator light is still flashing, only when the hard disk lights stop flashing, the end of the hard disk read and write before you can power off. 3, the correct mobile hard disk, attention to shock When the mobile hard disk, it is best to wait for more than ten seconds to shut down, after the hard disk stops completely. When the machine is turned on, the hard disk rotates at high speed, and the slight vibration may cause the disk to read and write head to rub against each other, resulting in the damage of the diskette, the broken track or the read-write head. So in the boot state, do not move the hard disk or the case, best to wait for ten seconds to stop the drive completely shut down after the mobile host or restart the power supply, power supply can be avoided due to an instant surge of hard disk damage. Should be careful in the hard disk in the process of assembly and disassembly, transportation, mobile hard disk bump is prohibited, the best use of foam or sponge packaging protection, to minimize the shock. Attention: the so-called anti-collision ability or shockproof system of the hard disk manufacturer means the shockproof and anti-collision ability of the hard disk in the non startup s