2.0配电柜进线开关选择-2.pptxVIP

Switchgear selection for a Switchboard incomer;Glossary;Part 1: Scope Part 2: The three questions Part 3: Other solutions Part 4: Synthesis Appendixes;Part 1 The ScopeWhat to put as incomer gear?;Part 1 The Scope The PFC Capacitor panel GOOD example;Part 1 The Scope Protection schemes;Part 1 The Scope What is really technically at stake ?;Part 2 The three questionsJust three questions…;Part 2 The three questions Standard requirement on SWBD incomer: DISCONNECTION;Part 2 The three questions Standard requirement to add a CB: a change in the current carrying capability;Part 2 The three questions Consequences if 2 CBs are in series: no selectivity,no limitation curves, worse protection against S/C;Part 2 The three questions Consequences if 2 CBs are in series: no selectivity;Part 2 The three questions Consequences if 2 CBs are in series: Designer responsibility is engaged, worse protection;Part 3: Other solutions Some other solutions;Part 3 Synthesis Other manufacturers promote LBS solution ;Part 3 Synthesis Other manufacturers promote LBS solution ;Part 3 Synthesis Sub switchboard incomer - Overview