第七章 无线鼠标电路图.pdfVIP

ATA1168 RF Optical Mouse SOC (27Mhz) Specification 2.0 MosArt SEMICONDUTOR CORP. 2008 All rights reserved ATA1168 RF Optical Mouse SOC Content 1. General Description 1 2. Features 2 3. Block Diagram 3 4. Package type and pin description 4 5. Assembly and Outline drawing 6 6. Function Description 8 7. Electrical Characteristics 10 8. Reference Application circuit 11 MOSART SEMICONDUCTOR CORP. ATA1168 RF Optical Mouse SOC 1. General Description ATA1168 is a wireless optical mouse sensor that supports all functions required in a wireless optical mouse system. The chip includes an optical sensor, a 27MHz transmitter, a controller, and other components in one complete package. ATA1168 also contains a DC-to-DC converter to boost up the battery supply voltage so that the whole system can operate adequately and safely. The key differences in ATA1168 from other optical sensors may be highlighted in that it is designed based on a system-level architecture in order to reduce manufacturing costs by eliminating side parts. ATA1168 contains MosArt’s MCU within one package so that no additional MCU and transmitting (TX) device are needed. MosArt’s MCU encodes data from the optical sensor and sends the encoded data via RF at 27MHz. MosArt’s MCU also equipped with a complete set of FSK modulator that also provides a dual-channels RF solution, and hence reducing further external components for RF interface. MosArt’s MCU could auto detect and R/W the EEPROM to keep mouse ID. Even it without EEPROM, ATA1168 still can keep mouse ID for 10 seconds for exchanging battery. ATA1168 is in a 24-pin optical DIP package with a resolution of 600/1000 counts per inch (cpi) and the rate of moti