Φ273mmAssel轧管机组生产薄壁无缝钢管的工艺开发.pdfVIP

273mmAssel轧管机组生产薄壁无缝钢管的工艺开发 钱 刚 ．胡 旋 (湖北新冶钢有限公司，湖北 黄石 435001) 摘 要 ：Assel轧管机生产薄壁无缝钢管 (径壁比325)时，存在着荒管头部易产生喇叭El，轧制过程中荒管甩 X 动大，内表面易产生内螺纹缺陷等问题 ，严重制约着机组产能的释放。湖北新冶钢有限公司通过采用增设轧管机 后台导卫装置及前台检测装置 ，改进轧管机辊型，优化轧制工艺参数等措施，大大减少了轧制过程中轧扭、卡钢 事故的发生，轧制的薄壁无缝钢管内螺纹缺陷也明显减轻，壁厚精度达到±8％，成材率在90％以上。 关键词：Assel轧管机；薄壁无缝钢管；轧制工艺：壁厚精度 Q -田 d n C 中图分类号：TG335．19 文献标识码：B 文章编号：1001—2311(2010)03—0024—04 G 仉 DevelopmentofProcessofRollingLight—wa H SeamlessTubewith(I)273Inm AsselPipeMi Abstract： In case ofrollinglight—wallseamlesssteeltubeswith D／S≥25 with the Asselmil1． several problemsareapttobeencounteredwith，includingformingofbell-likeendoftheshell，strenuouslyswingingof theshellduringrolling，anddevelopingofdefectiveinnersurfacespiralmarkandSOon，whichgreatlyimpede fullytappingoftheoperationline’Sproductioncapacity．Accordingly，aseriesoftechnicalmodificationactions are taken byHubeiXinyegangSteelCo．， Ltd．， including adding aguidingdeviceto therun—outtable and relevantmeasuringunitstotheincomingsection，improvingtherollprofileofthemillandoptimizingtherolling processparameters， etc．Asa result， failuresasoccurringin therollingoperation likematerialtwistingor jammingareconsiderablyreduced，andtheseverityofthesaidinnersurfacespiralmarkisSOlessened，while thetubewallthicknesstoleranceistightenedupto±8％，andthemillyieldincreasedtoover90％． Keywords：Asselpipemill；Light—wallseamlesssteeltube；Rollingprocess；Wallthicknesstolerance 0 引 言 越来越高的发展史 [。湖北新冶钢有限公司@273 Assel三辊轧管机作为中厚壁无缝钢管专用轧