293-abstract-珠光体片层间距的AFM测定-王军艺.docVIP

AFM在珠光体片层间距的测定中的应用 An Application of AFM at measurement of the thickness of lamella pearlite 王军艺 肖新星 李健 Junyi Wang Xinxing Xiao Jian Li 宝钢技术中心 Baoshan Iron Steel Co., Ltd, RD Center. 摘要:原子力显微镜技术（AFM）观察珠光体不仅能清晰地给出片层间距的三维形貌，还能够观察到片层取向。纳米尺度的实验结果显示出珠光体中的Fe3C的双层精细结构以及铁素体中细小颗粒。毫无疑问，AFM技术是在冶金工业显微分析技术中的重要补充手段。 关键词：AFM，珠光体，三维形貌 AbstractA three-dimensional topography of thinness lamella of pearlite has been observed by Atomic Force Microscope (AFM). Moreover a clear judgment about the orientation of the lamella pearlite was achieved as well. The results in nano-scale indicated a clear profile with double layer structure Fe3C and fine particles. It is no doubt that AFM is an important auxiliary method at microstructure analysis technique on metallurgy. Key words：AFM, Pearlite， 参考文献： [1] 于宝夏.对无扭控冷热轧高碳钢盘条索氏体含量金相检测方法几个关键问题的探讨[J] 冶金标准化与质量，1999年，37:22. [2] 高碳钢盘条索氏体含量金相检测方法[S] YB/T169-2000. [3] 陈斌,石振华.应用图像仪测量珠光体片层真间距[J] 物理测试，1998,(5):22-25. [4] 陈斌,石振华. 高碳钢盘条中索氏体含量的定量测定[J]金属制品, 1999,125(11):44-45. [5] 彭向和,曾俊,盛光敏等. 细片层珠光体团的塑性响应特性[J]重庆大学学报(自然科学版), 2000,23(1):33-36 [6] 马杭,刘天佐,赵文军.铁素体-珠光体钢中的疲劳裂纹扩展行为[J]甘肃工业大学学报, 1997,23(4)7-11 [7] 戴品强,何则荣,毛志远.珠光体裂纹萌生与扩展的TEM原位观察[J]材料热处理学报, 2003,24(2):42-45