基于matlab-elmd毕业设计大论文.docVIP

内蒙古科技大学 本科生毕业设计说明书（毕业论文） 题 目：用于振动信号处理的最优噪声参数选择的ELMD算法研究与应用 学生姓名： 学 号： 专 业：电子信息工程 班 级： 指导教师： 用于振动信号处理的最优噪声参数选择的ELMD算法研究与应用 摘 要 关键词：application of ensemble local mean decomposition algorithm to select the optimal noise parameters of the vibration signal processing Abstract The local mean decomposition (LMD) method is a new time-frequency analysis method for adaptive extraction of rotating machinery vibration signal characteristics, but the shortage of the method is the mode aliasing phenomenon in the decomposition process, the decomposition results distortion.The overlapping phenomenon presents a time-frequency noise assisted analysis method based on local mean decomposition for the general mixed modes —Ensemble local mean decomposition（ELMD) method. The EMLD method is to add the different sequences of white noise in the target signal,then the signal with noise is decomposed by LMD, finally ,taking the average number of decomposition results as the final decomposition result. This method is through the LMD method and the empirical mode decomposition (EMD) and ensemble empirical mode decomposition method(EEMD) is obtained with the method combining. Decomposition results show that the ELMD method to the original LMD method can effectively overcome the aliasing. To get a better decomposition results, it needs to do a optimal parameter selection for the white noise parameters which is added to LMD, the selection of optimal noise parameters directly affects the performance of the ELMD algorithm. The two important parameters: the white noise amplitude AN and the adding white noise frequency NE. The final will choose the optimal noise parameters of ELMD algorithm is applied to the fault diagnosis of vibration signals. Key words:Local mean decomposition; Modal aliasing; With noise; Ensemble local mean decomposition; The optimal noise parameters Selection 目录 摘 要 I Abstract II 第一章 绪 论 1 1.1 旋转机械振动信号处理研究的意义和现状 1 1.1.1 旋转机械振动信号处理研究的意义 1 1.1.2 旋转机械振动信号处