基于ARM的温度数据无线传输系统资料.docx

密级：学士学位论文　THESIS OF BACHELOR（年）题目：　　温度数据无线传输系统学院：系专业：　班级：　　学号：　　学生姓名：　　指导教师：　　起讫日期：温度数据无线传输系统专业：学号：姓名： 指导老师：摘要人们生产生活需要知道温度，工业生产需要知道温度控制温度。为了生产生活的需要，我们要有一套及时、方便、有效、快捷的传输温度量的系统。本系统主要有两个模块，一个温度采集发送模块和一个温度数据接收模块。在温度采集模块通过温度传感器DS18B20采集温度数据，这种传感器可将模拟的温度量转换成数字量通过IIC总线将数据传送到单片机，单片机采用LM3S1138芯片，这个芯片具有很快的处理速度，有单独的休眠模块，通过软件使其进入休眠非常省电。然后将温度数据送到无线发射模块，我采用的无线发射是工业通用的nRF905无线收发模块，将数据送到无线发射模块中，发射模块会自动将数据打包，最后将数据发送。数据接收模块中无线接收模块每隔650us扫描一次，当有同频率的信号过来时就开始接收数据包，将接收到的数据包解压，将数据送到单片机，然后单片机将数据送到上位机，上位机既可以处理数据。该设计可以使温度数据及时的监控，通过无线传输不用布线。并且可以方便的在上位机处理数据。关键词：DS18B20，LM3S1138，nRF905，温度采集，无线传输。Temperature data wireless transmission systemAbstractPeople need to know production and life of temperature, the industrial production need to know the temperature and control temperature. In order to the needs of production and life, we want to have a timely, convenient, efficient, quick transmission temperature amount of system.System there are two main modules, a temperature gathering send module and a temperature data receiving module. In temperature acquisition module through the temperature sensor DS18B20 collection temperature data, the sensor can be simulated temperature is converted into digital quantity through the IIC trunk to send data to a single-chip microcomputer, the single chip microcomputer LM3S1138 chip, the chip has quickly processing speed, has a separate dormancy module, through the software make it into the dormancy very province electricity. Then will the temperature data sent to wireless transmitting module, I use wireless launch is the nRF905 industrial general wireless transceiver module, the data sent to wireless transmitting modules, launch module automatically will data packing, finally will send data.Data receiving module wireless receiving modules in every 650 us scanning time, when the frequency of the signal with came through to receive data packets, will receive the packet decompression, data to the single chip microcomputer, and then the data sen