DD5-c9-高频电感和变压器设计.pptVIP

Chapter 9：Design of High-Frequency Inductors and Transformers;9-1 Introduction;9-2 BASICS OF MAGNETIC DESIGN;1 Design consists of: (1) Selecting appropriate core material, geometry, and size (2) Selecting appropriate copper winding parameters: wire type, size, and number of turns.;2 Overview of core material: ;(2) Powdered iron alloy cores: consist of small iron particles electrically isolated from each other. Various compositions Fe-Si (few percent Si) Fe-Cr-Mn Important properties have larger effective resistivity than laminated cores;(3) Ferrite cores Various compositions Iron oxide