一、执行器结构DesignConstruction.PDFVIP

一、执行器结构 : Design Construction 1. 指示器 1. Indicator 指示器符合 VID/VIE3845 NAMUR 标准，便于 Indicator according to VID/VIE3845 is convenient for mounting accessories 安装限位开关、定位器等附件。 such as limit switch box, Positioner and etc. 2. 输出轴（齿轮轴） 2. Pinion 镀 镍 合 金 钢 一 体 式 锻 压 输 出 轴 的 设 计 符 合 The design of the nickel-plated alloy steel integrated forging pinion drive is NAMUR, ISO5211, DIN3337 标准。特殊标准 according the NAMUR,ISO5211 and DIN3337 standards. Special standard 可根据用户要求定制。 are available upon request. 3. 缸体 3. Actuator Body High quality aluminum alloy extrusion formed. The surface has been treated 用优质合金铝挤压成形，表面进行硬质阳极氧化 by anodized hardening followed by epoxy polyester coating. Other surface 处理、环氧聚酯喷涂。PTFE，镀镍及颜色喷涂， treatments are available e.g. PTFE and Nickel plating as well as other colour 可根据客户要求定制。交期和价格另议。 coatings on request. 4. 端盖 4. End Cap 铝合金压铸，表面做阳极硬化处理、环氧聚酯喷 The surface has been treated by anodized hardening followed by epoxy 涂。PTFE，镀镍及颜色喷涂，可根据客户要求定 polyester coating. Other surface treatments are available on request e.g. 制。交期和价格另议。 PTFE and Nickel plating as well as other colours on request. 5. 活塞 5. Piston 采用铸铝硬质氧化处理，安装位置对称，动作迅 Manufactured from Die-cast aluminum and treated by anodized hardening o process. Symmetric mounting of the piston helps to ensure easy 速；延活塞轴向旋转 180 、颠倒安装活塞齿条 可改变输出轴的旋转方向。 maintenance. Rever