13各类民用建筑设计规范(国外英文资料).docVIP

13各类民用建筑设计规范 Site and architectural design (level two) lecture class thirteenth lecture courseware (Global vocational education online) Site and architectural design (level two) lecture class thirteenth Lecture Notes Code for architectural design of primary and secondary schools The first paragraph is in the last lecture. Two, school building design specification (GBJ, 99--86) 2.1.1 The schools main teaching room, the outer wall and the railway should not be less than 300m, and the vehicle flow more than 270 /h road side road side distance should not be less than 80m, otherwise, effective sound insulation measures must be taken. No overhead lines may pass through the campus. Day pupils should not cross town roads and highways, railway (a student dormitory of the school is not affected by this limit), the service radius of middle school primary school should not be greater than 1000m, the service radius of not more than 500m. 2, 2.2 school building capacity rate, primary school should not be greater than 0.8, secondary schools should not be greater than 0.9. 1.2.3 sports ground should be able to accommodate all students at the same time do exercises between classes. Primary school students should not be less than 2.3 m2, Secondary school students should not be less than 3.3m2. School track and field dimensions: primary annular track, 200m, straight track, two groups 60m; middle school circular track 250 - 400m, straight track two group 100m. Straight track, each group is calculated according to 6. Centrally located The primary and secondary schools in the district have difficulty in using them. The runway settings can be reduced appropriately, but the primary school can not be less than a group of 60m straight track, and the middle school can not be less than a group of 100m straight runway. 2.2.4 school green land, secondary schools should not be less than 1m2 per student, primary school should not be less than 0.5m2 per student. 2.3.5 the school gate should not be