300C 挖掘机液压系统系统自学重点.pdf

Hex Technician Skill Challenge Self-Study Highlights 300C HEX Machine Hydraulic System Emphasis should be placed on Hydraulic system operation, testing and adjusting. Must understand the operation of each following hydraulic subsystems: 1 Pilot System 1. Locate and identify the major components of the pilot system. 2. Function description 2 Pump and its control 1. Locate and identify the major components of the hydraulic pump. 2. Trace the flow of oil through the pump and pump controls. 3. Explain how changes in the three-signal pressures change pump flow. 3 Hydraulic Control Valve 1. Locate and identify the major components of the main control valve group. 2. Check hydraulic system pressures using the monitor panel. 3. Describe Anti-drift function 4. Describe re-generation circuit of both Boom and Stick control. 4 Swing Control System 1. Locate and identify the major components of the swing system. 2. Trace the flow of oil through the swing circuit. 3. Explain the operation of the swing parking brake. 5 Travel Control System 1. Locate and identify the major components of the travel system. 2. Trace the flow of oil through the travel circuits. 3. Explain the operation of the travel parking brake. 4. Explain the operation of the counterbalance valve 5. Know how the travel speed is changed 6 Fan