小型DC闪光的使用(国外英文资料).docVIP

小型DC闪光的使用 Introduction Many beginners take pictures in flash, photo effects are often not ideal, the common problems are the background dark, shining in the figure behind the shadow, some photos of characters over exposure problems. The main reason for these problems is that the intensity ratio between the scene light and the flash is not dealt with when shooting. This paper tries to use the entry-level camera users down under certain conditions to solve these common problems, this example is for Canon Power Shot A70 (hereinafter referred to as A70), but similar to other camera will have a certain reference value. Before reading this article, it is recommended to read the manual of Canon A70. The first part of the principles outlined may be boring, and need some basic knowledge, if not interested in understanding too many technical details, you can directly see the second part. A brief description of the principle For flash photography, when using manual exposure control, spot light can be through a combination of shutter and aperture, the flash is not a shutter control, through the exposure aperture, subject distance and flash output can control the flash, the result is the photographer can freely allocate scene brightness ratio with a flash of light, the desired shooting effect. This process gives a typical manual flash photography: according to the light and flash index weighing a proper aperture value F n, with F n as the foundation, combined with the light field get a shutter speed of the shutter is adjusted to get the spot light slightly overexposed or underexposed according to the need to be creative then, again by F n; and the subject distance is need to set the flash output; finally, press the shutter to get photos. Due to the above process involves light, aperture of equivalent exchange, flash index, sensitivity and other aspects of the problem, and this paper focuses on the automatic exposure function using the camera to obtain the ideal flash photo, so