注水井资料录取规定(国外英文资料).docVIP

注水井资料录取规定 Provisions for the acceptance of water injection wells Preface This standard is a revision of the Q/SL 0652-1997 Regulations for the acceptance of water injection wells. The main amendments are as follows: 1, in the standard increase in recent years has been mature and promote the application of stratified flow of data content. 2, the intake of static pressure data is revised as the admission of formation pressure data, and the admission content of pressure drop data is increased. 3, according to the current demand for oilfield development, the standards of data entry requirements have been modified accordingly, while the content related parts to be consolidated. This standard shall replace Q/SL 0652-1997 at the same time as the date of implementation. This standard has been put forward by the Shengli Petroleum Administration Bureau and the Standardization Committee of geological engineering. Drafting unit of this standard: Shengli oil production plant The main drafters of this standard are Sun Mengru, Liu Jianjun and Zhou Guangjun. Catalog I. standards and scope of application This standard has stipulated the data content that should be admitted to the injection well in the production process and the detailed rules for admission. This standard applies to the injection of water pressure less than 30MPa injection wells data, injection water pressure is greater than 30MPa, injection wells data can refer to the implementation of the admission. Two normative reference documents The terms in the following documents are referenced by this standard and become the provisions of this standard. For dated references, subsequent amendments (excluding corrections) or revisions do not apply to this standard, however, encourage the latest version of the parties to agreements based on this standard using these files. Any undated reference document whose latest edition is applicable to this standard. Water quality index and analysis method for SY/T 5329 to 94 clastic rese