1、当热空气“故障”灯亮时,因为过热空调面板上： A 热空气调压活门(国外英文).docVIP

1、当热空气“故障”灯亮时,因为过热空调面板上： A 热空气调压活门(国外英文资料) A. hot air pressure regulating valve closes and trim air valve closes B. hot air pressure relief valve opens and trim air valve closes C. hot air pressure regulating valve closes and trim air valve opens 2 what happens when the main and auxiliary passages of the air conditioning module are out of order?: A. the outlet temperature of the air conditioning module is controlled at 15 DEG by means of the anti icing valve B. air conditioning components closed 3 when the zone controller main channel and auxiliary channel fail, what temperature do components 1 and 2 maintain?: A. both are 15 degrees B., both of which are 25 degrees centigrade The C. module is 120 degrees centigrade, the component is 210, the temperature is D., the component is 124, and the component is 215 DEG C 4, once set in ON, which air conditioning component will work in the following way?: A. is automatic and independent B. manual and independent C. automatic and air conditioning module 1, active air conditioning unit 2 follow 5, in which case, the air conditioning component flow control valve closes automatically: A. the air conditioning components are overheated, the engine fire button is released, the engine is driven, and the water landing button is pressed B. bleed valve failure, air conditioning assembly outlet pressure increased C. above, A and B 6, if you want to see the position of the bleeder valve, you need to adjust the ECAM: A. air conditioning page, B. air entraining page, C. pressure page 7. On the ECAM cabin pressure page, which of the following is amber color?: A. shut down completely B. in flight, when the valve is opened (over 95%) C. is fully open on the ground 8, in the cockpit, APU manual shutdown of the car what are the possibilities?: A. APU main switch button, APU fire button switch B. APU main switch button C. APU fire button switch, APU turn off button 9, when, the APU N value on the ECAM status indicator indicates amber: A., N =10