各品牌型号路由器设置(国外英语).docVIP

各品牌型号路由器设置(国外英语资料) Asus AAM6000EV routing method: Enter in the Internet explorer browser ( for the gateway in the TCP/IP properties of the network card) Then ask for the user name, the default user name: ADSL, the default password: ADSL1234. 2. In the above project after go in, click on the Bridging option, after entering to delete all bridge, click the RFC - 1483 Brdiging Interface options (1483 b), delete all, then click on the ATM VC option, also delete all of them, according to add after delete Fill in the following: VC Interface: aal5-0 VPI: 8 (if not, change to 0) VCI: 35 Mux Type: LLC Max Proto per AAL5:2 Next, click the WAN option, then click the PPP option to add and fill in the following: The PPP Interface: the PPP - 0 ATM VC: aal5-0 IPF Type: Public Status: Start Protocol: PPPoE Service Name: it doesnt matter if you fill it out Use Dhcp: Disable Use the DNS: Disable The Default Route: Enable The Security Information The Security Protocol: PAP Login Name: your phone number Password: your Password (by default) And then submit Click Admin and click Commit reboot to press the submit, after a short while, after the submission of success, finally press the restart, it will do! Set the IP address in the network cards TCP/IP attribute to 192.168.1. X (X indicates the number of the fill, 2 to 254, but not 1, because the default IP address of MODERM is ) Selected DNS configuration, and enable the DNS, the host random fill, DNS server search order, fill out the primary DNS: 8 DNS (tianjin), according to add, then fill time DNS: 33 (this is Shanghai, just when the standby), good, finished, restart it. Im talking about the new black version! The silver and the Milky Way are about the same. /products/communication/download.asp This is the instruction manual for its official website. You can refer to it! There is a popular ADSL MODEM routing method set in tianjin Alcatel SPEED TOUCH 515 routing method: Open the network in the control panel and open the TCP/IP protocol