光通信网络接入端口采用智能识别方法的研究.pdfVIP

研究与开发 光通信网络接入端口采用智能识别方法的研究 沈越1 ，沈启东 2. 周祖荣 3 (1.大连交通大学电气信息学院大连 116028 ; 2. 青岛英凯利信息科技有限公司青岛 266100; 3. 青岛科技大学青岛 266042) 摘 要:光通信网络接入端口的无源器件长期以来一直是通信网络运行管控的盲区，由此造成大量的光纤 资源不能得到有效的管理和利用，使得网络运行维护管理工作效率低，质量难以提升。通过对光通信网络接入 端口需求进行分析和研究，提出一种采用智能电子标签的标识方法，用智能电子标签替代目前光网络使用的 纸标签，使光通信网络接入端口具有操作简洁、便利、准确、可靠、智能化的管理功能。 关键词:光纤通信;电子标签;智能化 doi: 10.3969/j .issn.l α)()-0801.2013.07.014 Study of Optical Communication Network Access Por~电 by Using Intelligent Recognition Method 1 Shen Yue , Shen Qidon矿， Zhou Zuron矿 (1. School of Electrical Infonnation Engineering , Dalian Jiaotong University , Dalian 116028, China; 2. Qingdao Increase Information Technology Co. ,Ltd吁 Qingdao 2661∞， China; 3. Qingdao University of Science and Technology , Qingdao 266042 , China) Abstract: 咀le passive components of optical commu日ication network access port is blind spot in communication network operation and control, which results in that a large number of optical fiber resources can t be managed and utilized effectively , causes the maintenance and management of network is inefficient. ßased on the analysis and study of the optical communication network access port , a solution was proposed by the using of the electronic lahel , intelligent electronic tags were used to replace the current paper labels in optical networks , which makes the optical communication network access port has the simple , convenient, accurate and reliable intelligent management capahilities. Key words: optical fiber communication , electronic tag , intelligent