光纤连接器原理(外国英语资料).docVIP

光纤连接器原理 Principles and classification of fiber optic connectors In the optical fiber communication (transmission) link, in order to realize different modules. Flexible connection between equipment and system, there must be a between the optical fiber and optical fiber (active) detachable connection device, can make the light path according to the required transmission channel, complete the scheduled or expected objectives and requirements to achieve and device connector can realize this function call. The two is the optical fiber connector surface precision docking, so that the optical output of the light energy to maximize the coupling to the receiving optical fiber, and the effect of intervention because of the optical link in the system caused by the reduced to the minimum, this is the basic demand of optical fiber connector. To some extent, fiber optic connectors also affect the reliability and performance of optical transmission systems. Fiber optic connection classification I. main mode of optical fiber connection 1. fixed connection. It is mainly used for permanent connection between optical fibers in optical cable lines, welding and bonding and mechanical connection are adopted. It is characterized by small joint loss and high mechanical strength. Equipment needs welding machine, about tens of thousands of RMB 2. active connections. Mainly used in optical fiber and transmission systems, equipment and connections between instruments, mainly through the optical connection plug connection. The utility model is characterized in that the joint is flexible and good, and the connection point is convenient, and the loss and the reflection are larger, which is the shortage of the connection mode. Now the loss also has been very good, dozens of RMB, can directly buy products, if you want to loose, also need to face polishing equipment, that is too expensive, buy directly jumper. 3. temporary connection. Connect measuring pigtail and is coupled between the optical fi