DM163011;DM163015;DM163007;中文规格书,Datasheet资料.pdfVIP

™ PICDEM CAN-LIN 1, 2 and 3 Demonstration Boards Summary Microchip offers three similar PICDEM CAN-LIN demonstration boards to support different PIC®microcontroller devices. All demonstrate the main features of the devices, especially those features of the integrated CAN module. In addition to the CAN network, the board also employs a LIN sub-network using Microchips PIC16C43X and PIC18F1320 device families. Each PICDEM CAN-LIN demonstration board includes both firmware and PC software for simulating a CAN network. The firmware comes pre-programmed on the sample device. The PC software and documentation are furnished on a CD ROM. Features PICDEM CAN-LIN 1 supports: • 68-pin PLCC PIC18C658 and 84-pin PLCC PIC18C858 devices • 20-pin PDIP PIC16C432 with integrated LIN Bus transceiver Package Contents PICDEM CAN-LIN 2 supports: • PICDEM CAN-LIN PCB • 28-pin SDIP PIC18F258 and PIC18F2680/2682/2685 devices • Serial cable • 40-pin PDIP PIC18F458 and PIC18F4680/4682/4685 • Sample programs, application notes and users guide devices (on CD) • 20-pin PDIP PIC16C432 with integrated LIN Bus Host System Requirements transceiver PICDEM CAN-LIN 3 supports: • PC-compatible system with an Intel Pentium® class or • 64-pin TQFP PIC18F6680 and 80-pin TQFP PIC18F8680 higher processor, or equivalent devices • A minimum of 16 MB RAM • 20-pin SSOP PIC18F1320 and MCP201 LIN Bus • A minimum of 40 MB available hard driv