啤机规范作业指导书的.ppt

一. 目的： 规范啤机操作要求， 预防工伤事故， 减少不良损耗， 降低生产成本， 提升工作效率， 提高产品质量。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 二. 工作职责： 2．1 啤机机长工作职责： Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 2．1.1 服从工作调配，按组长和车间主管的指示要求完成啤加工生产任务； Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 2．1.2 负责啤机啤版的检查、调试、安装或指导学徒安装调版； Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 2．1．3负责啤加工产品的啤前啤产品（纸张，灰板等）、啤板的质量检验和啤机生产操作过程的质量检查、控制和批量质量异常的反映，保质保量按时生产出合格产品； Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 2．1．4 负责机台区域的环境卫㔟，负责啤朸的保养及一般性维修。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 2．2 啤机跟机（上纸、铲纸）： 2．2．1　在啤机机长的指导下进行生产操作；完成组长和车间主任安排的工作； 。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 2．2．2　协助啤机长进行装版调机，在机长的安排下完成其他工作。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 2．2..3　负责啤前啤后产品加工质量检查,分选和自检。如待啤产品存在针位环准撕纸盒时检查有铲烂、啤坏、爆线、啤不穿、色位不准 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 三. 工作步骤 3．1 开机前先清除机身、炮面及周围的杂物，在机器运动部件按保养规定加入适量润滑油；开机空动转，听设备运转有无杂声，有异常要及时反映给上级管理人员。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 3．2 生产前查阅生产工程单，必要时要查看产品样版、菲林了解所加工产品的工艺要求，及加工数量要求。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 3．3 领取到啤板后要查看啤版刀线制作是否符合要求，待啤产品的规线、规格、外观是否可满足生产要求，对照工单要求检查上工序工作是否正常完成。发现有异常要向上级反映确认。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Clien