沥青焦回转窑内温度分布研究.pdfVIP

沥青焦回转窑内温度分布研究 1 2 2 谭 凯 靳世平 周金水 ， ， （1. 宝钢集团宝钢化工有限公司，上海200941 ；2. 华中科技大学能源与动力工程学院，湖北武汉430074） 摘要：国内某钢铁厂沥青焦回转窑由于无法直接测量炉内燃烧物料以及炉衬温度导致无法对炉内燃烧和炉衬材料选择做出科学的判 断，采用数值模拟和现场测试的手段对回转窑的温度场进行了准确的判断，计算值与测试值最大误差在5% 以内，计算结果表明在 15～35 m 煅烧带位置处炉内温度达到1 800 K，此处容易发生损坏。 关键词：回转窑；数值模拟；温度 中图分类号：TF355.1 文献标志码：A 文章编号： （ ） 1002-1639 2015 04-0001-03 The Distribution of the Temperature in the Asphalt Rotary Kiln 1 2 2 ， ， ZHOU Jinshui TAN Kai JIN Shiping (1 ， ， ， ； . Baosteel Chemical Co. Ltd. Baosteel Group Shanghai 200941 China ， ， ， 2. School of Energy and Power Engineering Huazhong University of Science and Technology Wuhan 430074 China) ， ， Abstract: The fuel gas temperature material temperature and lining temperature can not be measured in a asphalt coke rotary kiln so it is very difficult to choose the reasonable lining material and judge the burning situation in the rotary kiln. In the paper a model was developed ， to simulate the temperature and the temperature test also has been done. The error between simulation value and measured value was in 5%. The result indicates that the furnace temperature was 1800 K at 15～35 m where it is easy to damage. ； ； Key words: rotary kiln numerical simulation temperature