LTE_NAS_协议解读.pptVIP

6.4.3 EPS bearer context modification procedure The purpose of the EPS bearer context modification procedure is to modify an EPS bearer context with a specific QoS and TFT. The EPS bearer context modification procedure is initiated by the network, but it may also be initiated as part of the UE requested bearer resource allocation procedure or the UE requested bearer resource modification procedure. The network may also initiate the EPS bearer context modification procedure to update the APN-AMBR of the UE, for instance after an inter-system handover. See 3GPP?TS 23.401?[10] annex?E. 专用承载修改流程 修改QoS 不修改QoS 只修改TFT * 4.2 Linkage between the protocols for EMM and ESM 4.3 UE mode of operation 4.4 NAS security 4.5 Disabling and re-enabling of UEs E-UTRA capability 5.1.2 Types of EMM procedures 5.1.3 EMM sublayer states 5.1.4 Coordination between EMM and GMM 5.1.5 Coordination between EMM and MM 5.2.2 UE behaviour in state EMM-DEREGISTERED 5.2.3 UE behaviour in state EMM-REGISTERED 5.3 General on elementary EMM procedures 5.3.1 EMM modes and NAS signalling connection 5.3.2 Lists of forbidden tracking areas 5.3.3 List of forbidden PLMNs for attach in S101 mode 5.3.4 Equivalent PLMNs list 5.3.5 Handling of the periodic TAU timer and mobile reachable timer 5.3.6 Handling of timer T3402 5.3.7 Handling of the Local Emergency Numbers List 6.1.2 Types of ESM procedures 6.1.3 ESM sublayer states 6.1.4 Coordination between ESM and SM 6.1.5 Coordination between ESM and EMM for supporting ISR 6.2 IP address allocation 6.3 General on elementary ESM procedures NAS 协议解读 (Spec 24.301) NAS EPS MM 信令流程概要 (Spec 24.301) Common procedures 5.4.1 GUTI reallocation procedure 5.4.2 Authentication procedure 5.4.3 Security mode control procedure 5.4.4 Identification procedure 5.4.5 EMM information procedure Specific procedures 5.5.1 Attach procedure 5.5.1.2 Attach procedure for EPS services 5.5.1.3 Combined attach procedure for EPS services and non-EPS services 5.5.2 Detach procedure 5.