API标准（国外英文资料）.docVIP

API标准 API standard test questions Fill in the blanks 1. The acronym for the American Petroleum Institute is (API). 2. The American Society for testing and materials is abbreviated in English (ASTM). 3, the international standard English code name is (ISO). 4, the English abbreviation of product standard level is (PSL). 5, round thread casing is code (LC). 6 、 the code of the buttress casing is (BC). 7 、 the code number for non thickening tubing is (NU). 8 、 the name of additional thick tubing is (EU). The 9 and API 5CT standard names are (tubing and casing specifications). 10, API, 5CT divided the oil casing into (4) groups. 11, N80 steel grade, including N80-1 and (N80Q). 12, L80 steel grades include L80-1, L80-9Cr and (L80-13Cr). 13, API, 5CT: wall thickness allowable deviation is (- 12.5%). Weight tolerance (3.5%+6.5%) 14, API, 5CT provides: outer diameter is greater than or equal to 114.3mm of oil casing, the length of the straightness is not more than (0.2%); from each pipe two pipe end 1.5m range, the maximum straightness deviation (3.18mm). 15. The path rod parameters include the diameter of the rod and the diameter of the rod. 16, API, 5CT provides: J55, K55, N80-1, N80Q, P110 steel grade steel pipe requirements P and S content is less than equal to (0.030%). 17, Ninth Edition API 5CT effective date is (January 1, 2012). 18, color ring mark J55, a bright (green) N80-1, one (red) P110, one (white) 19. The current specification of API pipe line used by our company is the (44) edition. 20, API, 5L pipeline steel pipe has two kinds of product specification levels, namely (PSL1) and (PSL2). The minimum yield strength of steel grade 21 and L360 is (360MPa). 22, L360QS steel grade, Q said (quenched and tempered), S said (acid service). 23, L360NO in the steel grade, N means (normalization), O means (marine service). 24 、 pipe line hydrostatic pressure test, the pressure holding time should be no less than (5 seconds). 25 API 5L, Charpy impact test of temperature (0