ASYS烘箱（国外英文资料）.docVIP

ASYS烘箱 This article is contributed by wujinfeng05 Ppt documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Header Date RDS2100G, Dry, Oven training materials, training materials, equipment introduction: 1. Equipment introduction, equipment introduction 1. device usage The drying oven is a fully automatic drying oven which works in the air environment. It is a fully automatic drying oven which works in the air environment. The battery plate moves forward and through each heating zone, the heating areas are set at different temperatures for preheating, drying and cooling. The stove is equipped with a graphical display screen that the operator can see visually. 2. function of each part The equipment is mainly divided into two parts, mechanical transmission and heating, as well as safety protection devices. The equipment is mainly divided into two parts: mechanical transmission and heating W Page 1 Header Date (1) furnace belt transmission system; The battery is transported in the furnace. The rotating drum is placed at the inlet and outlet, and the rotating drum is placed at the inlet and outlet. The rotating drum can adjust the furnace band to run smoothly. The tight rollers are placed below the furnace and the furnace band is always fully tensioned. The rotation of the drum roller through the installation of the internal tension of the export is placed in the furnace bottom and furnace with sufficient tension to ensure always brushless motor driving the furnace with a 1Q speed controller, brushless motor speed controller for brushless motor control. If more than the selected torque value, the drive roller is separated from the drive motor. (for example, if the belt conveyor is jammed, if the belt conveyor is jammed) W Page 2 Header Date Drive unit: the drive unit consists of a brushless motor mounted inside the outlet and controlled by a 1Q speed controller. If more than th