T型线路互感参数带电测量的方法（国外英文资料）.doc

T型线路互感参数带电测量的方法 T line mutual inductance parameters live measurement method.Txt life is out of, not want to come out. Put down is once, can not put down is memory. Wherever I am, I only have a turning distance from you. Thirty-eighth volume February 2010 Yunnan electric power technology, YUNNAN, ELECTRIC, POWERVol, 38, No, 1Feb, 2010 Received date: 2009-12-26 Method for live measurement of T line mutual inductance parameters Qinyining (China Southern Power Grid EHV Transmission Companies Qujing Bureau, Yunnan, Qujing 655000) Abstract: it is analyzed that the current measurement method of mutual inductance parameter can not carry out the live measurement of T type mutual inductance line parameters, and puts forward that the T type A new method for measuring a line or a multiple line equivalent to a parallel line of mutual inductance. Matlab simulation results and RTDS simulation test measurements are presented The results show that the method is correct and feasible. Keywords: T type line mutual inductance parameter live measurement GPS CLC number: TM93, document identification code: B, article number: 1006-7345 (2010) 01-0030-04 1 Preface With the development of power system, it is restricted by corridor Double circuit or even more mutual inductance line is more and more. Existence of mutual inductance It will affect the magnitude of fault current and affect the calculation of relay protection. The factors that affect the zero sequence inductance and zero sequence mutual inductance are more than positive sequence parameters The zero sequence parameter of the complex line is calculated by the formula and the actual value There is a great difference between the protective relaying procedures and the zero sequence parameters Actual measurement. Conventional methods of measurement are difficult to implement, so lines It is a trend to study the method of electrified measurement of zero sequence mutual inductance. Electrified measurement of transmission line parameters ba