parker 单向阀DN 50-10C CHECK VALVE.pdfVIP

CHECK VALVE BULLETIN DN 50-10C Type CK-1 DN Port Size 20 - 150mm (3/4” - 4”) Suitable For: Ammonia, R12, R22, R502 and Other Common Refrigerants Features • Manual Opening Stem • Low Pressure Drop • Piston Type Gravity Closing • Flanged • Design Pressure (PS): 28 bar (406 psig) • Rugged - Heavy Duty • Body Material made from GGG40.3 • Complies with Pressure Equipment Directive 97/23/EC September 2007 Description Installation, Service, and Parts Information These piston type, gravity closing, heavy duty check valves are suitable for Ammonia, R-12, R-22, R-502, Purpose other refrigerants, certain oils and or fluids approved for The Type CK1 Check Valves prevent backward flow of use in refrigeration. All CK1 check valves are flanged and fluid in refrigerant suction, hot gas or liquid lines. They have a manual opening stem for manual operation. They are recommended for compressor discharge lines, also may be ordered with male adapter rings (through 4” size) for liquid lines and suction lines with temperatures as for close coupling. The 20-32 mm (3/4 - 1-1/4”) port size low as -30°C (-25°F). have a PTFE seat; larger valves have a metal to metal seat. A minimum pressure difference of .03 bar (0.5 psi) Principles of Operation is required to open the valve. This piston type check valve opens by the pressure difference between valve inlet and outlet. The pressure difference must be a minimum of .03 bar (0.5 psi).