压机液压系统.docVIP

Table of contents 目录 1 Safety instructions 1-1 安全操作说明 1.1 General 1-1 概论 1.2 Safety valves 1-1 安全阀 1.3 Hose lines 1-1 软管 2 Safety precautions 2-1 安全预防 2.1 General information 2-1 概论 2.2 Depressurizing the pressure vessel 2-1 给压力容器减压 2.2.1 Manual depressurization of plunger accumulator 2-2 活塞储能器的手动减压 2.3 Depressurizing pipelines 2-2 给管道减压 2.4 Measuring and venting hydraulic systems 2-3 测量和给液压系统排气 2.4.1 General information 2-4 概论 2.4.2 Preparing to vent the system 2-4 给系统排气的准备工作 2.4.3 Venting process 2-4 排气步骤 3 Maintenance instructions 3-1 维护说明 3.1 General 3-1概论 3.2 Cleaning the hydraulic system 3-1液压系统的清洁 3.3 Flushing the hydraulic system 3-2 液压系统的冲洗 3.3.1 Flushing time 3-2 冲洗时间 3.3.2 Flushing procedure 3-2 冲洗步骤 3.3.2.1 Switch on the cooling and filter pump 3-2 打开冷却过滤泵 3.3.2.2 Switch on the main drives 3-2 打开主驱动设备 3.3.2.3 Flush the ring line 3-2 冲洗油缸管道 3.3.2.4 Flush the blocks 3-4 冲洗集成阀块 Flush the main cylinder blocks 3-4 冲洗主油缸块 3.3.3 Install control valves 3-5 控制阀安装 3.3.3.1 Storing control valves 3-5 控制阀的储存 3.4 Hydraulic oil 3-6 液压油 3.4.1 Hydraulic tank and filling 3-6 液压油箱和液压油的填充 3.4.2 Oil change 3-6 液压油的更换 3.4.3 Notes on the miscibility of hydraulic oils 3-7 关于液压油的黏度的说明 3.5 Recharging with nitrogen 3-7填充 氮气 3.6 Taking back into operation 3-9 1 Safety instructions 安全说明 1.1 General 概论 It is indispensible to have read and understood the “Safety” chapter. In addition, follow the safety instructions in the Maintenance chapter for maintenance, servicing and repair work. In addition, follow the safety instructions in the Maintenance chapter for maintenance, servicing and repair work. It is essential to comply with all safety regulations! 认真阅读和理解安全说明在进行维修和维护工作时严格遵守安全操作说明 1.2 Safety valves 安全阀 Pressure limiting valves preventing excessive pressure buildup are installed on the oil sides. The pressure setting is locked by a lead seal and must never be modified.限制过多的压力形成的压力控制阀被安装在阀体的油侧。 压力装置被铅密封锁定，注意这个设定的压力千万不能被改动 。 Never modify the safety valv