供应商包装标准 - modine.pdf

供应商包装标准- 摩丁中国供应商包装标准- 摩丁中国 September 2013 Supplier Packaging Standard – Modine China 目 录 Content 第一部分、包装设定原则和基本要求……………………………………………………….2 Part 1: Supplier package principle and basic requirements 第二部分、包装标签…………………………………………………………………………6 Part 2: Supplier package delivery label 第三部分、摩丁采购送货单………………………………………………………………..10 Part 3: Supplier delivery note 第四部分、包装确认………………………………………………………………………..11 Part 4: Supplier package confirmation process 1 SHANCN-06-1C-01 供应商包装标准- 摩丁中国供应商包装标准- 摩丁中国 September 2013 Supplier Packaging Standard – Modine China 第一部分、包装设定原则和基本要求 Part 1: Supplier package principle and basic requirements 一般包装要求General Packaging Requirements  包装设定务必满足零件在正常的运输、装卸、仓储、供给等物流环节的品质不发生变化。 The supplier package must ensure the delivered part do not have any quality change during transportation, Material handling, storage, material supply period.  包装设定应该具备良好的作业性能；包装内部的缓冲材料只保留为了保证零件品质所必须 设置的部分，以最小限度为目标，能省则省。确保零件生产线供给工时和零件的拿取作业 工时达到最小化。 The Supplier package must ensure easy pick-up for production operator. The buffer internal package ensure to retain only as the necessary part in order to ensure parts quality. And it must be set to a minimum level to in order to improve operator Pick-up efficiency.  包装设定应在确保运输成本最低化的同时，以提高存储空间效率、满足给摩丁供货、减少 在库保障生产为目标。 The Supplier package must ensure the lowest transportation costs base on ensure quality basic. And at the same time, need ensure to improve the storage space efficiency.  零部件包装作为进料检验的组成部分。 The Supplier package will be regarded as one part of the incoming inspection. 包装优先选用顺序 Package Selection Preference  供应商可根