单片机温度测控仪课程设计程序(国外英文资料).docVIP

单片机温度测控仪课程设计程序 / / wiring test box is described in the program, you can understand the connection is successful #includereg52.h /*p0 read AD, P1 segment P2, P3 keyboard, four control, four control lines. Sbit wr=P1^4; Sbit rd=P1^5; //sbit cs=P3^2; Sbit eoc=P1^6; //sbit a0= P3^0; / / the three bit analog channel address selection, I/O due to lack of resources, the direct grounding, behind the read AD functions have also been shielding address selection operation //sbit a1= P3^1; //sbit a2= P3^2; Sbit bell= P1^7; / / set here for debugging, the actual operation should be amended //sbit lock=P3^5; Sbit wei0=P1^0; Sbit wei1=P1^1; Sbit wei2=P1^2; Sbit wei3=P1^3; //p2 segment selection Sbit dp=P2^7; Unsigned, char, zhutai, shezhi; Unsigned, char, up, down; Unsigned char AD_result; Unsigned char (readtemp); / / filter function, 200 point smoothing filter Unsigned char (scanf_key); / / scan key Void (scanf_command); / / scan command response Unsigned char move (unsigned char x); / / state switch Void send (unsigned char add, unsigned char num, unsigned char DAT); / / digital download function Void delay (unsigned int XMS); / / delay functions Void (init); / / initialize Unsigned char readAD (AD); / / read Void playtemp (unsigned char Wen); / / display temperature, the AD results into the temperature value, including conversion algorithm Unsigned char code zi[]={0x3f, 0x06,0x5b, 0x4f, 0x66,0x6d, 0x7d, 0x07,0x7f, 0x6f, 0x40,0x00}; / / array segment encoding Void send (unsigned, char, add, unsigned, char, num, unsigned, char, DAT) { P2=zi[num]; Switch (add) { Case 0: { Wei0=1; Wei1=0; Wei2=0; Wei3=0; } Break; Case 1: { Wei1=1; Wei0=0; Wei2=0; Wei3=0; } Break; Case 2: { Wei2=1; Wei0=0; Wei1=0; Wei3=0; } Break; Case 3: { Wei3=1; Wei0=0; Wei1=0; Wei2=0; } Break; } If (dat==1) Dp=1; Else Dp=0; } Void delay (unsigned, int, XMS) { Unsigned, int, I, j; For (i=xms; i0; i--) { For (j=110; j0; j--); } } Void, init () { Bell=0; Zhutai=0; Shezhi=0; Up=30; Down=10; Wr=1; Rd=1; / / cs=0; AD