国产H13性能(国外英文资料).docVIP

国产H13性能 Study on domestic H13 steel used as die material for aluminum alloy die casting Bijingbo (Department of mechanical and electrical engineering, Weihai Vocational College, Weihai 264210) The existing problems of microstructure of domestic H13 (4Cr5MoSiV1R) steel are analyzed. The improvement measures are given by means of technological comparison experiment. On this basis, The new process of conventional heat treatment and heat treatment can improve the performance of domestic H13 steel and improve the service life of the die. Keywords aluminum alloy die casting die; microstructure; heat treatment; service life; The, Study, of, Aluminium, Alloy, Casting, Die, Using, the, Material,, H13, Made, in, China BI Jingbo (Weihai, Vocational, College, Weihai, 264210) Abstract, This, paper, analyed, the, extisting, problem, microstructures, to, of, use, H13 (4Cr5MoSiV1R), made, in, China, supplied The, improved, measures, by, comparing, tests.On, this, base, adopting, common, and, new, heat, with, treatment, to, improve,, the, property, of H13, made, in, China, the, service, life, of, dies,, will, be, improved. Key, words, aluminium, alloy, casting, die, microstructures, heat, treatment, service, life In recent years, more than 70% of aluminum alloy die castings have been used in metal die castings, and the isothermal transformation curves of 1.2 domestic H13 steels have been obtained Especially in the automotive and motorcycle industry, the number of die castings is still increasing, and the isothermal transformation curve of Austenite for domestic H13 steel is shown in Figure 1, and the chemical composition of the steel is shown The die casting die is also increasing. The choice of mold material and the quality of heat treatment to the casting : 0.4%C, 1.05%Si, Mn = 0.4%, 5.0%Cr, 1.35%Mo, 1.10%V, Austria Quantity and die life have important influence. The temperature of the body is 1010 degrees centigrade. 3Cr2W8V steel has been widely used in the production of aluminu