射频通信术语概要1.doc

申请者自我宣告之检验项目 检验项目 测试参考 GSM 11.10-1 ETS 300 607-1 测试结果 符合与否 (Yes/No) 备注 Transmitter 发射机 Intermodulation attenuation 互调衰减 13.5 Receiver 接收机 Bad frame indication 劣讯框指示 14.1 Reference sensitivity 参考灵敏度 14.2 Usable receiver input level range 可用接收机输入位准范围 14.3 Co-channel rejection 同频道排斥 14.4 Adjacent channel rejection 邻频道排斥 14.5 Intermodulation rejection 互调排斥 14.6 Blocking and spurious response 阻塞及混附波响应 14.7 AM suppression AM抑制 14.8 Paging performance at high input levels 高输入位准呼叫效能 14.9 Other tests of the layer 1 第1层之其它测试 Timing advance and absolute delay 时间超前及绝对延迟 15 Reception time tracking speed 接收时间追踪速率 16 Access times during handover 交递间之撷取时间 17 Temporary reception gaps 瞬时接收间隙 18 Channel release after unrecoverable errors 无法恢复失误后之频道释出 19 Cell selection and reselection 细胞选取及重选 20 Received signal measurements 接收信号量测 21 Transmit power control timing and confirmation 发射功率控制定时及确认 22 Single frequency reference 单频参考 23 Tests of the layer 2 第2层测试 Initialization 初始化 Normal Initialization 标称初始化 25.2.1.1.1 Loss of UA frame UA讯框损失 25.2.1.1.2.1 UA frame with different information field 不同讯息领域之UA讯框 25.2.1.1.2.2 Information frame and supervisory frames in response to an SABM frame 响应SABM讯框之信息讯框及监视讯框 25.2.1.1.2.3 Initialization denial 初始化之拒绝 25.2.1.1.3 Total initialization failure 全部初始化之失败 25.2.1.1.4 Normal initialization without contention resolution 标称初始化不含争议部份 25.2.1.2 Initialization failure 初始化失败 25.2.1.2.2 Normal information transfer 标称讯息移转 Sequence counting and 1 frame acknowledges 连续计次及讯框1之接受 25.2.2.1 Receipt of an 1 frame in the timer recovery state 在定时器恢复状态下讯框1的接收 25.2.2.2 Segmentation and concatenation 区隔与连结 25.2.2.3 Normal layer 2 disconnection 标称第2层断讯 25.2.3 Test of link failure 联机失败测试 1 frame loss (MS to SS) 讯框1的遗失(MS至SS) 25.2.4.1 RR response frame loss (MS to SS) RR响应讯框的遗失(MS至SS) 25.2.4.3 Test of frame transmission with incorrect C/R values 不正确C/R值讯框传输测试 1 frame