工业设计 资料10概要1.pptVIP

LANDEN is a large freestanding structure which defines a place to sit/stay outdoors - in public. While rejecting the inappropriate patterns of domestic furniture it proposes a structure more accurately modelled on the context of its destination: the city environment. The main structure is made from heavy gauge steel profiles and metal grillage - all coated in plack paint. Its physical presence and strong visual reference engages the public in an immanent experience of urban reality. LANDEN is a meeting hub, a retreat/shelter ... an anchor point. Users of LANDEN climb two steps onto an octagonal platform which is elevated 60cm off the ground. The platform is paved with industrial rubber matting to provide a resistant but comforatble surface for sitting. A large circular cut-out in the middle of the platform allows for open legroom onto a lower suspended platform. Four outward leaning metal shields form a protective fencing/enclosure around the seating area. * 康斯坦丁奇波利奇 产品设计师（ 1965年-） 发展过程为： 市场营销和技术的情况介绍。 生产最初的设计方案作为一个草图。 评价第一次设计作为一个纸板模型和计算机，然后作出技术修订。 生产泡沫模型。 精制的模型进行模拟产品。 最后的细节设计和施工。 构建模具从该产品将会作出修改。 生产场外工具的样品产品。 最后的细节纹理，图形和包装。 在整个过程中，奇波利奇开发他的想法在不同的媒体：在电脑上，草图和三维形式的模式，从简单的纸板模型的产品。这些都是他说， “中的一种重要工具的初步设计阶段” 。奇波利奇使用的纸板模型作为一种三维人像素描，检查的数量和比例，他设计的移动之间来回的模式和他的计算机。 “这有助于我理解复杂的设计， ”他说， “而且往往导致替代解决办法将不会被发现的计算机上就有。 ” 随着这一进程的继续，他已决定坐标的设计的产品，奇波利奇建立一个更精确的泡沫模型，以巧妙的细节的产品。 “泡沫模型，重要的是完善产品的工作细节，如每个半径边缘， ”他说。 “最终，当他们已经描绘，他们模拟了最后的产品。 德国精神和英国教育的混合，去RCA学习设计前是橱柜匠（制造），喜欢去熟知和未知的地方旅行迷失在当地人群中，削减，简洁，极少（?Konstantin?Grcic强调和流行的极少主义是两码事），作为一个craftsman（工匠）你需要在结构、性能、美之中作决定，用硬纸板来作模型等 Konstantin Grcic 为 Plank 设计的整体成型塑料悬臂椅 1996 Prado was inspired by a shelf that I‘d built for my own office. It had the depth of a table, which inspired me to turn it into a desk. Even though it‘s made from wood and is reminiscent of a traditional desk, it‘s based on a very modern idea: it has a lot of open surfaces rather than closed storage space, which seems less relevant in the computer age.