不完全粘结锚固系统的拔出性能.pdf

International Journal of Rock Mechanics & Mining Sciences 48 (2011) 469–475 Contents lists available at ScienceDirect International Journal of Rock Mechanics & Mining Sciences journal homepage: /locate/ijrmms Pull-out behavior of an imperfectly bonded anchor system Yiming Zhao a,b, Mijia Yang b,n a School of Mines, China University of Mining and Technology, Xuzhou, Jiangsu 221008, PR China b Department of Civil and Environmental Engineering, the University of Texas at San Antonio, San Antonio, TX 78249, USA a r t i c l e i n f o a b s t r a c t Article history: A theoretical model of imperfectly bonded anchorage system was analyzed and validated using the Received 9 June 2010 ABAQUS code. Based on the proposed model, the axial stress in the anchor and shear stress at the anchor– Received in revised form epoxy interface along the embedded direction have been obtained. Then the slope of the axial stress in 3 September 2010 anchor along the embedded direction was analyzed and showed a steep drop at the location of imperfect Accepted 27 September 2010 Available online 3 November 2010 bonding part. This behavior is useful in many engineering projects and can be used to obtain the debonded locations of adhesive layer or fracture zones in surrounding concrete (rocks) during anchor service period. Keywords: Subsequently, a parametric study is adopted to analyze the distinct effect of composition factors on the Imperfectly epoxy bonded anchor s