光电子材料导论第一章 信息处理技术和材料.pptVIP

All-Optical Add/Drop Node AOHP ADD PORT DROP PORT AOS-1 AOS-2 Inverter TRANSIT PORT RING NETWORK All-Optical Add/Drop Node AOHP ADD PORT DROP PORT AOS-1 AOS-2 Inverter TRANSIT PORT RING NETWORK All-Optical Add/Drop Node AOHP ADD PORT DROP PORT AOS-1 AOS-2 Inverter TRANSIT PORT RING NETWORK All-Optical Add/Drop Node AOHP ADD PORT DROP PORT AOS-1 AOS-2 Inverter TRANSIT PORT RING NETWORK All-Optical Add/Drop Node Local Control Signal AOHP ADD PORT DROP PORT AOS-1 AOS-2 Inverter TRANSIT PORT RING NETWORK All-Optical Add/Drop Node AOHP ADD PORT DROP PORT AOS-1 AOS-2 Inverter TRANSIT PORT RING NETWORK All-Optical Add/Drop Node AOHP ADD PORT DROP PORT AOS-1 AOS-2 Inverter TRANSIT PORT RING NETWORK All-Optical Add/Drop Node AOHP ADD PORT DROP PORT AOS-1 AOS-2 Inverter TRANSIT PORT RING NETWORK All-Optical Add/Drop Node AOHP ADD PORT DROP PORT AOS-1 AOS-2 Inverter TRANSIT PORT RING NETWORK All-Optical Add/Drop Node AOHP ADD PORT DROP PORT AOS-1 AOS-2 Inverter TRANSIT PORT RING NETWORK All-Optical Add/Drop Node Local Control Signal ?d AOHP ADD PORT DROP PORT AOS-1 AOS-2 ?d ?d ?c Inverter RING NETWORK TRANSIT PORT Experimental Results (a) (b) (c) (d) (e) (f) 3 ns/div pk-2 pk-3 pk-4 pk-1 input data packets input locked control packet for added port added data packet input control signal for transmitted port transmitted data packet data packets at the node output Design of an All-Optical Packet-Switched Ring Network Slotted networks The addresses of empty packets are encoded such that they will be accepted by every node. Each node will continue to transmit empty packets even if they have nothing to send If a local packet is blocked at the add port, a signal will be sent back to a electronic controller to resend the packet into the ring Discussions The wavelength and power tolerance for the control signal are about ?0.05 nm and ?1 dB The wavelength and power tolerance for the data packets are about ?0.02 nm and ?3 dB respectively The switching ratio is about 7.5 dB m