机床行业标准及检查概要1.docxVIP

机器类型：Machine type客户：Customer序列号：Series-No.检验员：Inspector日期：Date备注：NoteTYPE标准号NORMNUMBER标准中文名称CHINESE NORM DESCRIPTION标准英文名称ENGLISH NORMDESCRIPTION等效文件CORRESPONDENCE TO检查项目INSPECTION ITEM检验结果INSPECTION RESULT安全设计基础Principles for safety designGB 16754-2008机械安全急停设计原则Safety of machinery -Emergency stop equipment, functional aspects. Principles for design.ISO 13850:20061.紧急停止按钮必须在进行任何操作规范中,都能迅速停止工作Emergency stop button must be carried out in any operating specifications, when press the button can quickly stop working2.直到急停功能手动复位以前，任何启动指令对于急停功能的作用而停止的那些操作应都是无效的Until stop function to manually reset, any instruction to stop function and those operations should be stopped invalidGB 19891-2005机械安全机械设计的卫生要求Safety of machinery -Hygiene requirements for the design of machineryISO 14159:20021.护栏表面应没有凹痕,裂纹,裂缝类的缺陷Thefence surface should be no dents, cracks, fracture type defects exist2.采用气压、液压夹紧装置，必须在气、液中断或失压后仍能可靠地夹持和夹紧Adopt pneumatic, hydraulic clamping, the clamping device, when the air or hydraulic interruption or loss of pressure can still gripping and clamping reliablyGB 5226.1-2008机械安全机械电气设备第1部分: 通用技术条件Safety of machinery-Electrical equipment of machines-Part 1: General requirementsIEC 60204-1:20051.各种操作指示、安全与警示性指示都应在相应部位上有明显的标志。Various operating instructions, warning and safety instructions shall be clearly marked in the corresponding position.2.有裸露危险的电缆,应确保电缆保护导体的连续性The exposed dangerous cable, should be taken to ensure the continuity of cable protection conductor人类工效学ErgonomicsGB/T 1251.1-2008工作场所的险情信号险情听觉信号Ergonomics – Danger signals for work places - Auditory danger signalsISO 7731为了可靠地识别险情信号,险情信号应清晰可听,且与环境中其他声音明显不同In order to reliably recognize danger signals, danger signals should be clear to hear, and with the environment is obviously different from other soundsGB/T 1251.3-2008人类工效学险情和非险情声光信号体系Ergonomics – System of danger and nondanger signals with sound and lightISO 11429:1996三色灯检查：Checkthe trichromatic lamp无故障时绿灯常亮。No troublegreen light lit2、停止时红灯常亮。When stop the re